Showtec DMX Merge 2-way DMX merger
All Prices Shown are Excluding GST.
SHOWTEC DMX MERGE
2-way DMX merger
The Showtec DMX Merge allows you to combine two DMX controllers to one DMX line or to use a second desk as back-up desk.
The unit has 4 modes:
1) HTP (Highest Take Precedence) In this case you can use two similar desks with the same addressing on one line. The DMX channel with the highest value has priority.
2) Back-up mode. The unit is connected to two DMX desks. Channel A has priority. Once channel A fails or has no DMX channel B takes over the show.
3) Merge mode. Two desks can be merged on one line. E.g. you can run a scene setter and DMX operator on one line. The Scene Setter will operate on channel 1-96 and the DMX Operator will have the channels 97 and higher. These positions can be freely addressed by the dip-switches.
4) LTP (Latest Take Precedence) In this case you can use two similar desks with the same addressing on one line. The DMX input with the latest value change has priority.
Voltage | 100~230VAC, 50/60Hz |
Power Requirement | 9VDC, 300 mA Min. (AC/DC adapter included) |
DMX Input | two 3-pin XLR male sockets on the front panel |
Extra | two 3-pin XLR male sockets on the rear panel |
DMX output | two 3-pin XLR female sockets on the front panel Extra one 3-pin XLR female sockets on the rear panel |
Dimensions | 483 x 73 x 45 mm (LxWxH) |
Weight | 1,15 kg |