Kino Flo Mini-Flo 139 Ballast 4pin XLR
All Prices Shown are Excluding GST.
Kino Mini-Flo 139 Ballast 4pin XLR
The Mini-Flo ballast, BAL-139X, is a dimming 12vdc ballast and can power one 9" or 12" Mini-Flo fixture. It uses an external power supply (PWS-1524X) to operate on 100vac-250vac. The advantage of having one ballast per fixture is that it gives the most rigging flexibility when the Mini-Flo fixtures are to be placed far apart. Also, the size of the ballast is small and easily hidden in a car. It comes with a 4-pin xlr connector.
Avoid operating in temperatures above 125°F (51°C). The ballast works reliably under most normal conditions, but it's also trustworthy in more harsh conditions, such as extreme cold. The Mini-Flo ballast is designed to operate at temperatures from 14F to 122F (-10C to +50C).
Note: The dimmer should be full up when striking the lamp. Once the lamp has come up to full temperature, in three to five minutes, then dim to the desired light level.
In cold temperatures the ballast may take longer to ignite the lamp. If it does not ignite within five seconds, switch the ballast to off, and try again. If lamp does not strike after two or three attempts, turn ballast off, check that the harness, lamp or any extension connections are secure and restrike.
Input Voltage: 12 VDC
Output Frequency: 25kHz
Amperage: F8/0.9A, F6/0.8A
Dimensions: 4.5 x 3.5 x 2" (11.5 x 9 x 5cm)
Weight: 0.8 lb (0.4kg)