Manfrotto

Ideal for use with a variety of stands and grip gearTripod adapter spigot with universal 16mm diameterStandard 6.4mm and 9.5mm threaded ends for co...

reduces a 3/8'' threaded screw to a standard 1/4''Adapter from 3/8'' to 1/4'' screwVery small, and sturdy2cm in height

Autopole SystemsSafe, secure and easy to useRubber cups at each end for extra gripCompact, perfect for smaller spacesAluminium autopole for complet...

double ended 5/8'' diameter stud1/4'' female thread, and a 3/8'' female thread on the other sideMade of BrassPlugs into Super Clamp 035 to provide ...

AccessoryIt helps to secure the tail end of a roll of background paperIt comes in two sections, for 4' and 9' width rolls of paperEasy to useCounte...

Converts 1/4'' screw to 3/8''Made of steelUse with light stands or tripods that have a top screw of 1/4''

Universal short 16 mm spigot with double male thread 1/4'' and 3/8''.It fits the (2905) Swivel Umbrella Adapter5/8'' diameter with 1/4'' and 3/8'' ...

Universal short 16 mm spigot with double female thread 1/4'' and 3/8''.16mm long universal adapter spigot1/4'' female thread and a 3/8'' female thr...

Monopod Head with Quick Release, wide 90° scopeUser-friendly tilt head gives you a practical monopod head90° angle provides you with wide ranging f...

3/8” ARRI style Anti–rotation adapt. for 244Mini & 244MicroPerfect for camera rigs, tripods and accessoriesReversible plate allows for use of t...

3/8’’ & ¼’’ adapt. compatible with with 244Mini and 244MicroMale 3/8'' and male 1/4'' threaded attachments for friction armsCompatible with Fri...

Fast attachment to the 244 Mini & Micro armsPerfect for external monitors, small LEDs and other accessoriesAnti slip rubber surface for safe at...

Mini Variable Friction Arm With Interchangeable AttachmentsProfessional variable friction armSolid aluminium arm for maximum strength and durabilit...

AccessoryIt provides an an additional 5/8'' socket to a Super ClampProvides an additional 16mm socket to Super Clamp 035Supplied with a safety pin ...

357PLV Sliding PlateMade in aluminum1/4'' and ¼’’ to 3/8''adapter includedRemovable Anti-Rotation PinRubber Grip StripsThis standard plate allows p...

Video Camera PlateMade in aluminum1/4'' and ¼’’ to 3/8''adapter includedRemovable Anti-Rotation PinRubber Grip StripsThis long version of the stand...

VIDEO CAMERA PLATEMade in aluminum1/4'' camera screw and 1/4” to 3/8'' adapter includedRemovable Anti-Rotation PinRubber Grip StripsWorks with 504H...

Key FeaturesReplaces 3465PLFor 505 Fluid HeadThe Manfrotto 505PL is the quick release plate for the 505 fluid head. This wedge comes with 2x 3/8" a...

Fluid video monopod designed for smooth pan movementsClever ball joint for perfect ground levellingRetractable feet for extra stability and fluid p...

28mm Male AdapterTop attachment 1/8'' (28mm stud)Bottom attachment M10 screw14cm in heightMade of zinc steel

The Manfrotto R701,224B can be used to replace a damaged or missing 3130 tripod head handle.

DISCONTINUED ITEM

Background Paper Hooks For Six Expan 046 setsExpanSupportSystemis a set of 2 background holderthe hooks support up to 6 backgroundsMade of steelSet...

Expan Support System 044 with 035 Super ClampsSet of 2It supports up to 3 background crossbars or Expan DrivesIncludes two Super Clamp 035Same as 0...

ExpanSupportSystem 045Can be fixed to a wall with the supplied studs and screwsEasy Way to Hang Background PaperIt can be fixed using superclampSet...

Camera mounting adaptorAllows use of 3/8' camera mounting plate into 16mm socketUniversal 3/8'' thread attachmentAllows use of 3/8' camera mounting...

AdaptersAttachmentDesigned with high-quality brassStandard 9.5mm and 6.4mm screws for compatibilityEasily slots into a super clampCompact enough fo...

500 fluid video head & 535 cf single leg tripodFixed fluid drag system in both head pan and tilt movementsFixed Counterbalance systemSliding ca...

Replacement PartsThis Manfrotto Connection for 351MVB2 Tripod and Head is a replacement part kit comprised of a hex screw, locking washer, double e...

Super ClampsTripod clamps with90° fastening for extra strengthCrafted from lightweight cast alloyVersatile enough for tubes between 13mm and 55mmCr...

Quick release system with ''dove tail'' designCompact and lightweight2 plates includedSupplied with 1/4' and 3/8' camera fixing screws. Fixing 1/4'...

Provides weight to keep Expan chain tight.ExpanSupportSystemIt keeps the chain tangle-free and tidyFor the plastic chainIts weight is 0.66 lb (0,3k...

The Manfrotto 595CLA Fig Rig Clamp is part of the 595B Fig Rig Camera Stabilizer. It consists of a camera platform with a threaded screw bolt, simi...

FlexibleArmsFor holding small gobos, reflectors, props, flash headsDiameter of 13mm (1/2in), 55cm (21.6in) longProvided with hex stud to fit Super ...

Fluid Video Monopod With Sliding PlateTowering maximum height for flawless overhead shootingFeatures a fluid cartridge to facilitate smooth pansBal...

500 Fluid Video Head with 60mm half ballFixed Fluid Drag System on PAN and TILT movementsFixed Counterbalance systemSliding plate for the fastest c...

Ø100mm Half Ball made in aluminum for pro-high durability useuniversal 3/8 screw for head attachmentShort locking handle ideal for ground level sho...

520BALLSH 75Mm Short Half BowlØ75mm Half Ball made in aluminum for pro-high durability useuniversal 3/8 screw for head attachmentShort locking hand...

Allow to take sequential constant-angle shots around one axisAmple choice of rotation angleClick-stop selector screw included and attached to safet...

Hot shoe adapt. compatible with 244Mini and 244MicroColdshoe attachment for friction armsCompatible with Friction arms 244micro, 244mini and 244mic...

SkyTrackSystemsSky track accessoriesStudio accessoriesprofessional and reliable accessoriesThese are from the end of the rail and run on ball-beari...

Accessoryused to support shelves, glassUse in combination with Super Clamp 035 to support shelvesHigh versatility17cm long and 4cm deepSet of two b...

492 Micro Ball Head with Hot Shoe MountTough and durable aluminium bodyComes with standard cold shoe in aluminiumIncludes universal screws for exte...

Attaches to shaft of most lightstands with ø of 19, 20, 25, 28mmThree sections max extension to 2.1 m (6.5')Dismantled length is 71cm (28'') for ea...

Professional Magic Arm, smart centre lever and flexible extensionSuperior construction for maximum strength and durabilityErgonomic handle for prec...

Stand AccessoriesSet of 3 casters for light stands with legs of 19mm diameterThey slip on, and are locked in place with an allen wrenchvery smooth ...