Grip

Allow to take sequential constant-angle shots around one axisAmple choice of rotation angleClick-stop selector screw included and attached to safet...

The Manfrotto 521SB Remote Control Splitter Box allows you to plug in two 521 series remotes to control the camera with both hands. This means you ...

DISCONTINUED ITEM

Made in aluminumStandard inner threadTubular aluminum for strength and reduced weight150mm (5.9'') short Rods are one of the basic building blocks ...

Quick Release Rotating PlateQuick Release Plate Locking KnobBi-injected Soft Rubber Handle and FeetThe Manfrotto Modo Steady 585 is a handheld came...

Quick Release Adapter with Sliding Plate and Safety LockChange supports without disassembling your cameraIncludes a safety lock for extra securityQ...

357PLV Sliding PlateMade in aluminum1/4'' and ¼’’ to 3/8''adapter includedRemovable Anti-Rotation PinRubber Grip StripsThis standard plate allows p...

3/8’’ & ¼’’ adapt. compatible with with 244Mini and 244MicroMale 3/8'' and male 1/4'' threaded attachments for friction armsCompatible with Fri...

Rectangular Plate with 3/8' and 1/4' screwDescriptionThe Manfrotto 200PL is easy-to-use, intuitive and practical. You get everything you need in a ...

Used with Manfrotto's Arca-compatible Q6 Top Lock quick releaseFast, easy, secure camera quick release for heavy pro equipmentAlso compatible with ...

Q6 Top Lock quick release adaptor, complete with plateFast, easy, secure camera quick release for heavy pro equipmentSafety pin to stop the plate a...

The Manfrotto 458HL Tripod Strap/Carrying Handle is made to carry a Manfrotto Neotech or 2nd generation 3001PRO and 3021PRO series tripods. It is a...

Quick release system with ''dove tail'' designCompact and lightweight2 plates includedSupplied with 1/4' and 3/8' camera fixing screws. Fixing 1/4'...

Monopod Head with Quick Release, wide 90° scopeUser-friendly tilt head gives you a practical monopod head90° angle provides you with wide ranging f...

190SPK2. Spiked Foot For 190 Series

Converts tripod head screw from 3/8'' to 1/4''Made of aluminiumCompatible with 806, 809 and 816 modelsWeight0.125 kgMaterialAluminium

This is a fork attachment for styrene gobos, it measures 12.5X20cm (5X7 in) and is supplied with 1/4'' and 3/8'' female attachment.For polystyrene ...

Universal short 16 mm spigot with double female thread 1/4'' and 3/8''.16mm long universal adapter spigot1/4'' female thread and a 3/8'' female thr...

Universal short 16 mm spigot with double male thread 1/4'' and 3/8''.It fits the (2905) Swivel Umbrella Adapter5/8'' diameter with 1/4'' and 3/8'' ...

SkyTrackSystemsSky track accessoriesStudio accessoriesprofessional and reliable accessoriesThese are from the end of the rail and run on ball-beari...

White translucent perspex cover for back or front lightingAssembles and breaks down easily without the need of toolsDimensions of plexiglass panel ...

Professional, compact standard mini clampDesigned from hard wearing aluminium alloyVersatile enough for studio or location workComes with a standar...

Short adapter spigot 3/8'' and 1/4''.Spigot with 1/4'' and 3/8'' screwsVersatile use3/8'' to 1/4'' screw attachmentsMade of Brass

Short adapter spigot 3/8''+3/8''.Spigot with two 3/8'' screwsVersatile useTwo 3/8'' screw attachmentsMade of Brass

Provides weight to keep Expan chain tight.ExpanSupportSystemIt keeps the chain tangle-free and tidyFor the plastic chainIts weight is 0.66 lb (0,3k...

Converts 1/4'' screw to 3/8''Made of steelUse with light stands or tripods that have a top screw of 1/4''

double ended 5/8'' diameter stud1/4'' female thread, and a 3/8'' female thread on the other sideMade of BrassPlugs into Super Clamp 035 to provide ...

Background Paper Hooks For Six Expan 046 setsExpanSupportSystemis a set of 2 background holderthe hooks support up to 6 backgroundsMade of steelSet...

Expan Support System 044 with 035 Super ClampsSet of 2It supports up to 3 background crossbars or Expan DrivesIncludes two Super Clamp 035Same as 0...

Accessoryused to support shelves, glassUse in combination with Super Clamp 035 to support shelvesHigh versatility17cm long and 4cm deepSet of two b...

The Manfrotto 040 Narrow U-Hook Glass Holders is a pair of U hooks that you can use for when you need to take photos through plate glass (for speci...

AdaptersAttachmentDesigned with high-quality brassStandard 9.5mm and 6.4mm screws for compatibilityEasily slots into a super clampCompact enough fo...

Autopole SystemsSafe, secure and easy to useRubber cups at each end for extra gripCompact, perfect for smaller spacesAluminium autopole for complet...

Attaches to shaft of most lightstands with ø of 19, 20, 25, 28mmThree sections max extension to 2.1 m (6.5')Dismantled length is 71cm (28'') for ea...

reduces a 3/8'' threaded screw to a standard 1/4''Adapter from 3/8'' to 1/4'' screwVery small, and sturdy2cm in height

Ideal for use with a variety of stands and grip gearTripod adapter spigot with universal 16mm diameterStandard 6.4mm and 9.5mm threaded ends for co...

MB SV-ZP-3BIManfrotto Protective hard shellEasy carrying with neck strapcompact sizewater repellenthigh quality materialThe Piccolo-3 pouch is a sm...

MB PL-CRC-15Pro-LightSuitable for medium camcorders and DSLRs with shooting rigsVideo camera rain cover made from waterproof RipStop materialUnders...

Key FeaturesReplaces 3465PLFor 505 Fluid HeadThe Manfrotto 505PL is the quick release plate for the 505 fluid head. This wedge comes with 2x 3/8" a...

The Junior 3" Wall Plate, Junior 1-1/8" Receiver from Kupo lets you mount a 1-1/8" receiver on a wall, other flat surface or just about anywhere. T...

The Lightwave A5 Boompole is designed by Rycote and is constructed of lightweight aluminum. The boompole is specifically designed for T.V. and news...

The Kupo Nesting Apple Box Set features a space-saving design advantage, allowing pancake, quarter, and half apple boxes to be stored neatly inside...

All prices shown are excluding GST. GOBO PLATE Gobo Plate is a simple and versatile mounting adapter that adds compatibility to your gear. From cam...

All Prices Shown are Excluding GST. Prolite 5/8"(16mm) Stand Adaptor  Takes M10 Bolt.  Aka 'Baby' Receiver  

All Prices Shown are Excluding GST. Prolite Poly Holder stainless steel

All prices shown are excluding GST. Quick Release accessory for the Matthews Noga Arm 350628 - Quick Release NOGA Arms by Matthews are compat...

All Prices Shown are Excluding GST. Tree Branch Holders allow the user the opportunity to use a real tree branch instead of a cello or wood cookie....