Skip to content
We're open under Level Orange for masked pickup.
We're open under Level Orange for masked pickup.

Kino Flo Select 30 LED DMX

SKU SYS-S30-230U
Original price $6,641.00 ex. GST - Original price $6,641.00 ex. GST
Original price
$6,641.00 ex. GST
$6,641.00 ex. GST - $6,641.00 ex. GST
Current price $6,641.00 ex. GST

All prices shown are excluding GST

Kino Flo Select 30 LED DMX

SYS-S30-230U


Kino Flo's Select 30 and 20 LED DMX systems were launched with great success in June 2016. Lighting crews embraced the remote LED controller and the light-weight fixture that allow for rigging flexibility. In addition, users welcomed the ability to dim without color shift, dial in Kelvin temperatures, and select Green/Magenta settings using on-board controls or DMX lighting consoles. But, there was also a built-in secret.

Kino Flo launched the Select LED system as a white light source with Green/Magenta selection. Kino Flo used an RGB emitter to control the Green/Magenta color, but we knew that the RGB feature could do more. We just needed to sort out a menu system that would be as intuitive when using the controller manually as when using it on DMX.

The Select LED now includes three menu options, one white and two color menus. Those who prefer to work with white light can use the "white menu" that gives the user access to Dimming, Kelvin and Green/Magenta control channels. Kelvin range is from 2700K tungsten to 6500K daylight.

In the first color menu, the Kelvin range travels from 2500K tungsten to 9900K daylight, and Kino Flo has set up a fourth channel called Gel. The Gel channel includes Kino Flo presets such as blue & green screen, sodium vapor, mercury vapor and over 100 well-known lighting gels. In addition, there is also a fifth channel called Hue Angle and sixth channel, Saturation. These two channels behave similar to a traditional color wheel, where you have white light in the center, the Hue angle determines the color along a 360-degree range, and Saturation determines how much color is applied. The second color menu provides individual red, green, blue (RGB) control. This menu is a great way to work with apps with predetermined RGB presets or color wheels.

For those that have already purchased these units, there will be a free firmware update available in April 2017 to gain access to the new color menus.

Kino Flo's new Select LED's also come with standard DMX and wireless DMX (Lumen Radio®), 24VDC input, and universal voltage input 100-240VAC (1.25 Amps at 120VAC). We also recently added new Snapbag Softbox and Snapgrid accessories.

Select LED Features

  • Kelvin presets
  • Dial-in color temperature control between 2700K-6500K
  • Extended color pallete from 2500K-9900K
  • Green/Magenta Control
  • Hue angle and Saturation adjustments
  • RGB control
  • Works with Apps with predetermined RGB presets or color wheels
  • Can use preset buttons to store custom Kelvin settings
  • Light levels do not change when selecting Kelvin settings
  • Color-correct with high color rendering index (CRI 95)
  • Universal input 100VAC-240VAC or 24VDC
  • Energy efficient, draws 1.25A, 120VAC and 6.25A, 24VDC (Select 30 LED)
  • Flicker-free, quiet operation
  • Full range onboard and DMX dimming
  • DMX wireless link (Lumen Radio)
  • DMX Auto Terminate
  • No color shift while dimming
  • Remote fixture with built-in barndoors
  • Fixture includes removable 90° Honeycomb Louver
  • Honeycomb louver also available in 60° as accessory
  • Removable Center Mount
  • Mounts to stand, light enough to be hand-held

Contents:

KIT-S30-230U -Â Select 30 LED DMX Kit, Univ 230U w/ Flight Case

  • 1 x Select 30 LED Fixture
  • 1 x Select 150 LED DMX Controller
  • 1 x MTP-BW41 Mount w/ Baby Receiver (16mm)
  • 1 x Extension, 25ft
  • 1 x Flight Case

Dimensions:

46 x 11 x 16.5” (117 x 28 x 42cm)

46.5 lb (21kg)